As an Amazon Associate I earn from qualifying purchases.1. VEGCOO
2 Pack Quartz Clock Movement Kits Battery Powered, Clock Movement Replacement with Long and Short Shaft Clock Mechanism, Wall Clock Mechanism Parts Motor Replacement DIY Repair Parts Black
VEGCOO - Product size: a set roman numeral plate contains 12 numbers; a set arabic numeral plate contains 15 numbers. Different styles pointers make you can choose the desire pointer to assemble according to your own preferences. Package includes: you will receive 2 packs wall clock mechanism parts motor replacement kit, 2 sets of numbers, 1 short shaft clock mechanism battery powered, including 1 long shaft clock mechanism battery powered, 6 sets black different styles of the hour, minute and second hands, some small parts for installation.
Pointer installation instructions: these wall clock replacement movement parts are easy to install.
When viewed from the side, insert the hour hand first, the 3 pointers must be parallel to each other. With the tip of the hand pointing towards 12 o'clock, then the minute hand and finally the seconds hand.
The hour, safe, durable, environmentally friendly, which can be used for a long time. The size of the clock movement is 69 * 56 * 16 mm. Wide application: our quartz wall clock replacement movement parts are suitable for repairing, replacing and DIY clocks, frameless wall clocks, cross stitch, perfect for craft clocks, three-dimensional embroidery etc. The size of a single arabic numeral is 20 mm, and the size of a single Roman numeral is 23 mm. Please see the picture for details of the length of the pointer.
Brand | VEGCOO |
Manufacturer | VEGCOO |
Height | 6.9 cm (2.72 Inches) |
Length | 5.6 cm (2.2 Inches) |
Width | 3.81 cm (1.5 Inches) |
2. Hossom
Clock Mechanism kit with Clock Hands Parts, High Torque Long Shaft Clock Movement Mechanism for Replacement Repairing Clock Accessories, 6 Pieces Quartz Clock Movement
Hossom - Appropriate dimensionthe total length of the shaft is approximately 21mm/ 083 inches, and the thread length is approximately 15 mm/ 059 inches, the clock movement mechanism is suitable for clock panels with a thickness of 9-12 mm/ 035-047 inches. Package includes6 pieces quartz clock movement mechanisms with 6 sets of clock hands with different styles and length, enough quantity for daily use and replacement, you can choose various styles according to your needs.
Please check the size before installing with this clock accessories kit.
Clock movement mechanismUltra silent scanning design. Multifunctionalthe clock mechanism is used to replace the clock parts of the home decorative quartz wall clock. Quality materialthe movement is made of abs material, which are lightweight and corrosion-resistant, and can be applied for a long time, they are strong and durable, and the clock hands are made of quality aluminum, providing you with a nice usage experience and decorative effect.
It is suitable for repairing, most can be applied to cross-stitch, three-dimensional embroidery, replacing or manufacturing clocks, frameless draw clock, craft clock, etc. Clock movemen without noise which can offer your sleep a silent environment.
3. Mudder
6/25 Inch Maximum Dial Thickness, Repair Kit Quartz Clock Movement, 17/25 Inch Total Shaft Length Silver
Mudder - Nice diy supply clock: wall clock mechanism is suitable for repairing, replacing or making a clock; You can DIY a wall clock with your family to enhance the practical skill.
Size: total shaft length is 17 mm 17/ 25 inches, thread length is 8. 7 mm 7/ 20 inches; jump second movement, suitable for 2 - 6 mm 1/ 12 - 6/ 25 inches thickness clock panel. Exquisite and useful design: with a hanger, the clock movement kits can be hung on the nail or gone through by a string, and then attach to other objects.
Clock replacement: this quartz wall clock is a good repair tool parts kit, you can use it to replace your broken clock movement, then you can save your broken clock from the trash bin. Various application: quartz clock movement replacement is applicable to cross-stitch, frameless draw clock, craft clock, three-dimensional embroidery, etc.
Brand | Mudder |
Manufacturer | Mudder |
Height | 1.6 cm (0.63 Inches) |
Length | 5.5 cm (2.17 Inches) |
Width | 5.5 cm (2.17 Inches) |
Part Number | Mudder-Quartz Clock Movement-01 |
4. Outus
3 Pieces Non Ticking Quartz Clock Movement Mechanism with 6 Sets of Short Hands Battery Operated Clock Motor Kit for DIY Repair Replacement 0.5 inch/13 mm
Outus - Appropriate dimension: the total length of the shaft is approximately 13 mm/ 05 inches, and the thread length is approximately 6 mm/ 024 inches, and the clock hands fit for a diameter of 25 - 35 cm clock surface, the clock movement mechanism is suitable for clock panels with a thickness of 1 - 3 mm/ 004 - 012 inches, please check the size before installing with this clock accessories kit.
Quality material: the movement is made of abs material, and the clock hands are made of quality aluminum, they are strong and durable, and can be applied for a long time, which are lightweight and corrosion-resistant, providing you with a nice usage experience and decorative effect.
Package includes: you will get 3 clock movements, you can also change or make your own clocks; Please note that the back is silver, you can choose various styles according to your needs; The replacement parts are suitable for maintenance, 3 wall clock hooks, 3 wall nails and 6 sets of different pointer kits, 3 sets of accessories, and the front is as shown in the picture.
Work effectively: powered by aa batteries, which can provide the watchmaker with accuracy and reliability, the quartz DIY wall clock mobile mechanism has nice precision, will not produce annoying ticking sound, moreover, will provide you with a quiet environment. Br>about 27 mm/ 1. 06 inches, 64 mm/ 2. 52 inches, 102 mm/ 4. 02 inches, 57 mm/ 2. 24 inchesseconds hand length: about 55 mm/ 2.
5. zhibeisai
Ideal for Wall Clock DIY or Repair Tool, Clock Mechanisms Silent Quartz Clock Mechanism Kit Wall Clock Movement Kit Replacement Parts and Hands
zhibeisai - 13 mm, minute hand is 93 mm, and the thread length is approx. If you find that the pointer is slightly bent after opening the package, and the clock hands are made of quality quartz, you can use some heavy books to press the pointer on a flat table to make it straight.
Size details: the clock hands and mechanism total shaft length is approx. 6 mm; hour hand is 71 mm, second hand is 90 mm. Accurate time keeping and quiet motor: The DIY clock mechanism offers great accuracy and dependability, they are equipped with sweeping motion, no ticking and will provide you with a quiet environment.
Widely applicable: these clock parts and hands can be applied in office, classroom, craft clocks, library and other occasions, and also suitable for cross-stitch, living room, bedroom, restaurant, frameless wall clocks, quartz wall clock to use.
Clock design: the wall clock parts design of the clock hands are simple and fashionable, and the color is classic and does not fade; The long-axis clock mechanism provides accuracy and reliability. Quality material: the silent clock mechanism is made of plastic material which is sturdy and durable for a long time, don't worry, which is light in weight and corrosion-resistant to provide you with nice use and decorative effect.
Brand | zhibeisai |
Manufacturer | zhibeisai |
Height | 5.6 cm (2.2 Inches) |
Length | 1.6 cm (0.63 Inches) |
Width | 3.81 cm (1.5 Inches) |
6. ueslwser
Quartz Clock Mechanisms Kit, Wall Clock Motor Movement Repair Parts, Quartz Clock Mechanism Movement Kit for 6 mm Dial Thickness
ueslwser - Not include battery. Please check the sizes before purchase. Widely applied - clock movement with short hands applicable to cross-stitch, three-dimensional embroidery clock for repairing, craft clock, frameless draw clock, replacing or making a clock.
Please do not install them with too much pressure or they will be bent. Note - the clock movement hands are made of light aluminum. Reinforced packaging - Better packaging avoid clock hand bent during transportation.
Clock movement replacement - clock making kit includes a movement with hook ring, 1 screw, 2 Gasket plastic + metal, 3 black clock hands, easy for installation, suitable for 6mm thick clock panel. Elegant pattern - this clock movement replacement parts works well on different styles of clock frame.
7. Hicarer
Hicarer 28 mm Long Shaft Quartz Clock Movement Clock Parts Repair Kit Black
Hicarer - Size detail: movement shaft is 28 mm/ 1-1/ 10 inches ling, thread length is 204 mm/ 4/ 5 inches; jump second movement is suitable for 12 - 16 mm/ 12/ 25 - 5/ 8 inches thick clock panel.
109 mm/ 4. 3 inch. 85 mm/ 3. 3 inch; Minute hand is approx. Center hole to the tip length: hour hand is approx. 120 mm/ 4. 7 inch; Second hand is approx. Convenient metal hook: delicate spindle quartz clock replacement movement parts with metal hook, which is convenient to use.
Match power: small power consumption, just need 1 of 1. 5 v aa battery that can run a long time; Warm notice: battery is not included in the package. Package detail: includes hardware, hanger, 3 hands and protect cardboard box and instructions, make your DIY clock project successful.
Brand | Hicarer |
Manufacturer | Hicarer |
Height | 4 cm (1.57 Inches) |
Length | 16 cm (6.3 Inches) |
Weight | 0.07 kg (0.15 Pounds) |
Width | 6 cm (2.36 Inches) |
Part Number | Hicarer-Shaft Quartz-01 |
8. Vokmon
Silent Quartz Clock Mechanism Kit, Quartz Mechanism Clock Mechanisms with White Clock Hands,for DIY Clock Shaft Length 13 mm
Vokmon - Install the quartz movement set according to the instructions to ensure that the three needles remain parallel. Accuracy and reliability: our silent clock mechanism can be used to replace or repair your wall clock, it will provide you with a quiet environment, and without ticks, the sweeping seconds hand shows the time more precisely and accurately, perfect for your creative DIY ideas.
Hand specifications: clock hands is 71 mm/2. 79 inches, second hand is 90 mm/3. 54 inches, and the total shaft length of the clock hands and mechanism is approximately, minute hand is 93 mm/3.
66 inches, 13 mm. Reminder: Pay attention to the size when purchasing. Note: 1 aa battery not included. Suitable for repairing, replacing or making timepieces.
Wide range of applications: our quartz clock mechanism can be used for cross stitch, 3D embroidery, frameless drawing clocks, craft clocks, etc. Package included: quartz clock mechanism includes 1*quartz movement, 1*Hour Hand, 1*Metal Washer, 1*Second Hand, 1*Rubber Washer, 1*Minute Hand, 1*Brass Nut. Reminder: do not press hard during installation to prevent the pointer from bending. Our pointers are packaged in special boxes to ensure that the pointers do not bend during shipping.
Brand | Vokmon |
Manufacturer | Vokmon |
Height | 5.6 cm (2.2 Inches) |
Length | 1.6 cm (0.63 Inches) |
Width | 3.81 cm (1.5 Inches) |
9. Mudder
3 Pieces High Torque Long Shaft Clock Movement Mechanism Quartz Clock Motor Kit with 5 Different Pairs of Hands Clock Repair Parts Replacement Accessories
Mudder - 5 different styles and lengths of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect. 14. 6 mm/ 057 inches; jump second movement is suitable for 9 - 13 mm/ 035 - 051 inches thickness of clock panel.
What you will get: package includes 3 pieces of high torque long shaft clock movements with 5 different pairs of hands, good for repairing, these replacement parts suit well to different styles of clock frame, replacing or making a clock by yourself.
Scope of application: these clock repair replacement parts fit for cross-stitch, frame-less draw clock, craft clock, three-dimensional embroidery, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.2
20 mm/ 08 inches, and the thread length is approx. Accurate and quiet: the long shaft clock mechanism offers great accuracy and dependability, equipped sweeping motion allows for no ticking so as to provide you with a quiet environment. Size details: the total shaft length is approx.
Brand | Mudder |
Manufacturer | Mudder |
Height | 53.34 cm (21 Inches) |
Length | 10.16 cm (4 Inches) |
Width | 0.1 cm (0.04 Inches) |
Part Number | Mudder-Élevé Moteur-t-5510 |
Model | Mudder-Élevé Moteur-t-5510 |
10. Esteopt
Long and Short Shaft Wall Clock Mechanism Parts Motor Replacement DIY Repair Parts, Quartz Clock Movement Replacement, Clock Mechanism Kit Battery Powered
Esteopt - Wide applicationdiy quartz wall clock replacement movement parts, replacing or making a clock, three-dimensional embroidery, frameless draw clock, good for repairing, craft clock, suit for cross-stitch, also suit well to different styles of clock frame.
Clock movement mechanismultra silent scanning Design, two different shaft length quartz movement for your choice. Package includes 2 pcs high torque long shaft clock movements with 5 different pairs of hands, good for repairing, these replacement parts suit well to different styles of clock frame, replacing or making a clock by yourself.
Sizetotal shaft length is 20 mm 08 inches, suitable for 9 - 13 mm 035 - 051 inches thickness clock panel;total shaft length is 16 mm 062 inches, thread length is 15 mm 059 inches; jump second movement, thread length is 8 mm 031 inches; jump second movement, suitable for 4 - 6 mm 015 - 023 inches thickness clock panel.
Warm noticeplease check the dimensions of this clock mechanism replacement movement before purchase, and when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them. Sweep clock movement without any noise which can offer your sleep a silent environment.